hi hi, cũng đơn giả thôi mà a. minhduc ơi

[cuahangso1]

=D> dùng cáp O2, hoặc zin, đưa máy tính về WCESCOMM.exe chạy SPVunock.exe....

[bsff20]

MÁY CŨNG ÍT_75C GIÚP ANH EM ĐI MÀ,đọc kỹ trước khi unlock: Switch off your phone.
2) Take out the SD Card from the side of the phone.
3) When the phone is off, press down the "record" (the button under the power button) and the power button at the same time and hold for a few seconds.
4) You will be prompted to "press any key to enter boot loader", do so and press any key.
5) You are now at the famous "Canary" screen (hopefully) where there are 3 coloured bars. Pop your SPV into the USB Cradle.
6) On your computer, press CTRL+ALT+DELETE and close the program "WCESCOMM" or "WCESCOMM.exe". The Activesync icon should disappear from the clock tray.
7) Now run the SPVUnlock program. You should get a "Retrieving SPV Unlock Code : 0%" message. Incrimenting to 33%, 66% then finally 100%.
8) It will now display your unlocking code. Write this down, or keep it on the screen.
9) Take the battery off your phone. Then pop in a sim card from another network (Virgin, Vodafone, T-Mobile etc.) Put the battery back on and turn the phone on.
10) The phone should then, after a second or a minute or so ask you for an unlocking code. Enter the code that the program gave you.
11) You should see a screen saying
"Info"
"Phone Unlocked"
And thats it, you can now use your phone when you want on any network without having to do any type of battery trick, just pop it in and take it out whenever you feel like

[myanco2003]

Davis ơi SmartPhone không hề đơn giản đâu

[binhan]

Uh mà đang nói SmartPhone or PocketPC? :rolleyes: