hanoi-evc
10-07-2012, 10:24 AM
Xem video:
http://www.youtube.com/watch?v=Yl91gQikaoghttp://games.donapex.net/gfx/q3_fon.jpg
Phiên bản mới hỗ trợ chuyển động, chỉ với những cái lắc vẩy tay là bạn có thể quay trái phải nhìn lên xuống rất tiện dụng, thật tuyệt vời phải ko nào !
Dữ liệu Quake III ở đây (down đủ 5 part rồi mới giải nén) với những ai chưa cài bao giờ!
http://www.mediafire.com/file/btjnwy0tnb2/Quake3.part1.rar
http://www.mediafire.com/file/vzgenjmyvjm/Quake3.part2.rar
http://www.mediafire.com/file/ntjfygkzjmg/Quake3.part3.rar
http://www.mediafire.com/file/2en2wmiy1ny/Quake3.part4.rar
http://www.mediafire.com/file/xdm0zdymke0/Quake3.part5.rar
Rồi copy vô thẻ nhớ dạng
e:\QUAKE3
|
+---baseq3
| | pak0.pk3
| | pak1.pk3
| | pak2.pk3
| | pak3.pk3
| | pak4.pk3
| | pak5.pk3
| | pak6.pk3
| | pak7.pk3
| | pak8.pk3
Hướng dẫn:
1. Improved menu readability through bigger fonts where necessary
2. Fixed console texts
3. A command for setting the zero-point to the current tilt level:
set_zeropoint
(This can be binded to a key!)
4. Cvars for tweaking:
* accelerometer (default value = 1) --- Turn accelerometer control on/off. 1 = enabled, any other value = disabled.
* sens_y (default value = 0.55) --- Y axis sensitivity, compared to X. Float value.
* deadzone (default = 2) --- The accelerometer doesn't move the mouse until you tilt it by more than the deadzone value from the zero-point (to prevent shaking etc.). Integer value.
* zeropoint_x (default = 4) --- The zero-point, which is the value of the accelerometer's X axis when the mouse should be still. It needs to be 4 on my phone to prevent the mouse from veering to the left (or was it right, I don't remember). Integer value.
* zeropoint_y (default = 40) --- The zero-point for the Y axis. Integer value.
Download here: (Bộ cài)
http://www.mediafire.com/?3yyiylhyt1m (http://www.anonym.to/?http://www.mediafire.com/?3yyiylhyt1m)
http://www.youtube.com/watch?v=Yl91gQikaoghttp://games.donapex.net/gfx/q3_fon.jpg
Phiên bản mới hỗ trợ chuyển động, chỉ với những cái lắc vẩy tay là bạn có thể quay trái phải nhìn lên xuống rất tiện dụng, thật tuyệt vời phải ko nào !
Dữ liệu Quake III ở đây (down đủ 5 part rồi mới giải nén) với những ai chưa cài bao giờ!
http://www.mediafire.com/file/btjnwy0tnb2/Quake3.part1.rar
http://www.mediafire.com/file/vzgenjmyvjm/Quake3.part2.rar
http://www.mediafire.com/file/ntjfygkzjmg/Quake3.part3.rar
http://www.mediafire.com/file/2en2wmiy1ny/Quake3.part4.rar
http://www.mediafire.com/file/xdm0zdymke0/Quake3.part5.rar
Rồi copy vô thẻ nhớ dạng
e:\QUAKE3
|
+---baseq3
| | pak0.pk3
| | pak1.pk3
| | pak2.pk3
| | pak3.pk3
| | pak4.pk3
| | pak5.pk3
| | pak6.pk3
| | pak7.pk3
| | pak8.pk3
Hướng dẫn:
1. Improved menu readability through bigger fonts where necessary
2. Fixed console texts
3. A command for setting the zero-point to the current tilt level:
set_zeropoint
(This can be binded to a key!)
4. Cvars for tweaking:
* accelerometer (default value = 1) --- Turn accelerometer control on/off. 1 = enabled, any other value = disabled.
* sens_y (default value = 0.55) --- Y axis sensitivity, compared to X. Float value.
* deadzone (default = 2) --- The accelerometer doesn't move the mouse until you tilt it by more than the deadzone value from the zero-point (to prevent shaking etc.). Integer value.
* zeropoint_x (default = 4) --- The zero-point, which is the value of the accelerometer's X axis when the mouse should be still. It needs to be 4 on my phone to prevent the mouse from veering to the left (or was it right, I don't remember). Integer value.
* zeropoint_y (default = 40) --- The zero-point for the Y axis. Integer value.
Download here: (Bộ cài)
http://www.mediafire.com/?3yyiylhyt1m (http://www.anonym.to/?http://www.mediafire.com/?3yyiylhyt1m)