Capree iON BatteryTimer - ứng dụng kiểm tra time sử dụng pin

[tandaiphat]

Hiện thị thông tin chi tiết của pin


http://up.anhso.net/upload/20091115/16/o/anhso-58_Liemlovevn7.jpg


Phần mềm hiện thông tin chi tiết của pin bao gồm thời gian sử dụng, thời gian còn lại, số lần sạc ...
Hiện thị khá chính xác, thuận tiện cho bạn có thể chủ động trong việc sạc pin.

[myanco2003]

Xài thằng này e thấy nó khá là hao pin
E test từ mấy bản trước rùi, được cái màn hình chờ hiển thị pin, rất pro

[qnkha]

Capree iON BatteryTimer v1.04 S60v3/S60v5 SymbianOS9.x N CA Style Unsigned Cr*cked-FoXPDA

http://www6.0zz0.com/2010/02/25/14/800155662.jpg

The remaining battery time and more...

Have you ever been concerned if your battery survives the whole day when far from the battery charger or have you experienced unexpected battery drain over a single day? If so, using iON BatteryTimer for S60 3rd will appreciably improve your day-to-day smartphone experience.
It can be installed on any S60 3rd device with 320x240 and 640x360 pixels screen resolution while offering the control of operating time remaining to complete discharge, providing the estimated future date&time of the battery being completely discharged and presenting how long the battery holds its charge on average. The iON presents data in three ways: main application, standby plug-in, power saver.
Features:
Provides information about:
Operating time remaining to complete discharge,
Estimated future date&time of the battery being completely discharged,
How long the battery holds its charge on average.
Fast and handy access to remaining time at home/standby screen.
Power saver with additional ‘big’ battery level percentage indicator, built-in system notifications (e.g. missed calls, messages, unread emails, current profile, keypad lock).
Precautions
During the installation process you will be prompted to accept copying data to your device internal memory - not an extra memory card. It will use only small amount of memory, about 150kb and is required for proper operation of the program. There is also a need to run background ?Core’''''''''' process which must start automatically each time device is booted. However, it utilizes negligible amount of CPU time (less than 1% once per minute).
You have 9 days to test fully functional trial version and to activate the application afterwards. You can register your license key with one device (IMEI) for a lifetime and it cannot be transferred to any other device. It can be reinstalled and activated at the same device as many times as needed.
The most accurate readings will be after 3-5 full charge/discharge cycles. So be patient, please.
Quick start
Follow these four quick steps to start using iON in the most effective way. Before proceeding make sure you have installed iON using appropriate .sis file and have accepted Precautions.
Step 1 -Start the main applications
After installation you should be able to find iON BatteryTimer icon among installed applications (e.g. path for Nokia N95 is MAIN MENU > APPLICATIONS > ION BATTERYTIMER). After starting the application you will see Trial mode and Welcome dialog.
Step 2- Enable Standby plug-in
Choose OPTIONS menu and STANDBY PLUG-IN > ON. It will activate Standby plug-in on home screen of your device, showing small battery icon and operating time remaining to discharge. If plug-in is enabled it will start automatically each time your phone is started.
Step 3- Enable power saver
If you prefer to test or use dedicated power saver choose iON Power saver from your device power savers menu (path for Nokia N95 is TOOLS > SETTINGS > GENERAL > PERSONALIZATION > THEMES >POWER SAVER).
After 3-5 charge-discharge cycles iON will be the most accurate. Should some inexact estimation happens you are advised to fully charge battery and use RESET option from main OPTIONS menu.
Step 4 – Enable Active Standby iON shortcut (optional)
If you prefer fast access to all data provided by iON main application you can enable Active standby application shortcut at Standby mode settings (e.g. path forNokia N95 is MAIN MANU > TOOLS > SETTINGS > GENERAL > PERSONALIZATION > STANDBY MODE > ACTIVE STANDBY APPS. ). Choose Shortcut (e.g. SHORTCUT 3) and then find iON BatteryTimer radio button among all applications. Now you should see iON icon on the home screen.
Whats New In Version 1.04 :
Lack of icons on FP0 devices - fixed
Standby plug-in startup error on FP0 devices - fixed
Plugin procentage indication is back at the portrait mode
Better overall estimation performance

[furniweb]

Capree iON BatteryTimer v1.04 S60v3 SymbianOS9.x Pinstripe Shilca Style Unsigned Cr@cked-FoXPDA


http://i49.tinypic.com/5da4g3.jpg

The remaining battery time and more...
Have you ever been concerned if your battery survives the whole day when far from the battery charger or have you experienced unexpected battery drain over a single day? If so, using iON BatteryTimer for S60 3rd will appreciably improve your day-to-day smartphone experience.
It can be installed on any S60 3rd device with 320x240 and 240x320 pixels screen resolution while offering the control of operating time remaining to complete discharge, providing the estimated future date&time of the battery being completely discharged and presenting how long the battery holds its charge on average. The iON presents data in three ways: main application, standby plug-in, power saver.

Features:

Provides information about:

Operating time remaining to complete discharge,
Estimated future date&time of the battery being completely discharged,
How long the battery holds its charge on average.


Fast and handy access to remaining time at home/standby screen.
Power saver with additional ‘big’ battery level percentage indicator, built-in system notifications (e.g. missed calls, messages, unread emails, current profile, keypad lock).



Precautions
During the installation process you will be prompted to accept copying data to your device internal memory - not an extra memory card. It will use only small amount of memory, about 150kb and is required for proper operation of the program. There is also a need to run background ?Core’''''''''' process which must start automatically each time device is booted. However, it utilizes negligible amount of CPU time (less than 1% once per minute).
You have 9 days to test fully functional trial version and to activate the application afterwards. You can register your license key with one device (IMEI) for a lifetime and it cannot be transferred to any other device. It can be reinstalled and activated at the same device as many times as needed.
The most accurate readings will be after 3-5 full charge/discharge cycles. So be patient, please.

Quick start
Follow these four quick steps to start using iON in the most effective way. Before proceeding make sure you have installed iON using appropriate .sis file and have accepted Precautions.

Step 1 -Start the main applications
After installation you should be able to find iON BatteryTimer icon among installed applications (e.g. path for Nokia N95 is MAIN MENU > APPLICATIONS > ION BATTERYTIMER). After starting the application you will see Trial mode and Welcome dialog.

Step 2- Enable Standby plug-in
Choose OPTIONS menu and STANDBY PLUG-IN > ON. It will activate Standby plug-in on home screen of your device, showing small battery icon and operating time remaining to discharge. If plug-in is enabled it will start automatically each time your phone is started.

Step 3- Enable power saver
If you prefer to test or use dedicated power saver choose iON Power saver from your device power savers menu (path for Nokia N95 is TOOLS > SETTINGS > GENERAL > PERSONALIZATION > THEMES > POWER SAVER).
After 3-5 charge-discharge cycles iON will be the most accurate. Should some inexact estimation happens you are advised to fully charge battery and use RESET option from main OPTIONS menu.

Step 4 – Enable Active Standby iON shortcut (optional)
If you prefer fast access to all data provided by iON main application you can enable Active standby application shortcut at Standby mode settings (e.g. path for Nokia N95 is MAIN MANU > TOOLS > SETTINGS > GENERAL > PERSONALIZATION > STANDBY MODE > ACTIVE STANDBY APPS. ). Choose Shortcut (e.g. SHORTCUT 3) and then find iON BatteryTimer radio button among all applications. Now you should see iON icon on the home screen.

Whats New In Version 1.04 :


Lack of icons on FP0 devices - fixed
Standby plug-in startup error on FP0 devices - fixed
Plugin procentage indication is back at the portrait mode
Better overall estimation performance

[longdatautovol]

Capree iON BatteryTimer v1.05 S60v3/v5 SymbianOS9.x Unsigned *******-FOxPDA + E-Mod by c1cl0n@FoxPDA

Capree iON BatteryTimer v1.05 S60v3/v5 SymbianOS9.x Unsigned *******-FOxPDA







http://a.imageshack.us/img227/2249/superscreenshot0043.jpg
http://a.imageshack.us/img237/6269/n97features.jpg







Did you ever concern if your battery survive the whole day while far from the A or did you experience unexpected battery drain down over a day? If so, using iON BatteryTimer for S60 will appreciable improve your day-to-day smartphone experience.

Features

* Provides information about:
o Operating time remaining to complete discharge,
o Estimated future date and time of the battery being completely discharged,
o How long the battery holds its charge on average,
* Fast and handy access to remaining operating time at the home/standby screen.
* Power saver with additional the ‘big’ battery levels percentages indicator, built-in system notifications (e.g. missed calls, messages, unread emails, current profile, keypad lock).

Precautions :


During the installation you will be prompted for accepting required installation on your device memory not an additional card (uses small amount of memory, about 150kb). It also needs background ‘Core’ process which must starts automatically each boot time and utilizes device CPU in less than 1% once per minute.


Whats New :

* The latest iON version 1.05 with S60 5th support and 3rd edition improvements.